Get Rid Of Upvc Door Handle Replacement: 10 Reasons That You No Longer Need It

· 5 min read
Get Rid Of Upvc Door Handle Replacement: 10 Reasons That You No Longer Need It

Choosing the Right UPVC Door Handle Replacement

It's easy to replace your upvc handles however, choosing the correct handle can be difficult. Modern double-glazed handles are fitted with spring cassettes, however older handles do not.

If your upvc handle seems loose and floppy, it could be a problem with the internal components of the multipoint lock. This article will discuss several possible problems & their causes.

Sagging or drooping handles

UPVC handles are prone to wear and tear, especially in older properties. The most common reason the handle becomes floppy due to a damaged spring cassette in the door lever. This is usually caused by excessive force, and the square spindle that holds the cassette could be moved or rounded off.

It is a good thing to know that a uPVC handrail replacement can be completed within a matter of minutes. The first step is to remove the old handle by unscrewing the fixing screws visible on the side of the lever plate. After the handles have been removed, you can take them off and replace the cassette.

On the internet, you can pick from a variety of uPVC handles, many of which come with different finishes. The finish you choose will determine the life span of your handle as well as how it is easy to clean. Finishes such as Resista, Stainless Steel, or PVD are designed to resist corrosion and last up to 25 years.

After choosing a color or style, you are able to choose the type of handle you require. The most commonly used types are pad and lever arrangement. Lever pads are often used to stop access from unauthorised people. They are equipped with both a lever inside and a paddle out.

Then, you should measure and note the dimensions of the handle you currently have. You'll need the PZ dimension (the distance from the screw hole to the middle of the lever) as well as the length of the handle and the dimensions of the keyhole. Once you have the measurements you can then compare these to the handle sizes matrix to determine the right replacement.

Broken springs

Over time, the handles of uPVC doors can get loose or wobbly and at times the spring cassette inside may break. The tiny springs move the lever into a horizontal position and without them your doors won't lock properly.

Modern uPVC handles have these cassettes incorporated directly into the back plate. These springs are typically installed into older uPVC doors mechanisms. It's not something you can fix yourself, but it's worth having your locksmith take a look as this could be the reason for the sagging uPVC handles.

visit site  of the most common issues associated with uPVC door handles is that they become loose or wobbly with time. This is typically due to worn-out springs, which is easily fixed. The reason for this is usually excessive handling of the handle. The square spindle inside the handle wears down and cause the springs to move.


To fix this issue, you'll need to open the door towards the handle plate and unscrew all screws. This can be done using a Philips screwdriver. After the screws are removed, the handle can then be removed. The plates for the handle can then be carefully removed. Then, you can remove the springs that were in use and replace them with fresh ones.

This is important to note when purchasing a replacement handle. This measurement is known as the PZ measure. It is recommended that it be taken with an accurate tape measure in order to be accurate.

After replacing the springs you should be able to use the handle with no issues. But, it's recommended to lubricate the mechanism inside to make sure that everything functions just as it should. This will ensure that your uPVC door is as secure as it is, and improve their comfort over time.

Handles that slide around

Handles that slide around can be caused by a number different reasons. One of the most frequent causes is when the levers on the handle aren't aligned properly with the lock. This is a problem that can occur with both uPVC and composite doors, but it is usually more noticeable on older doors since they are usually made of less durable materials that don't stand up well to the elements.

This issue can be fixed by a professional, who will adjust the handles and ensure they're in line with the door lock. They'll also examine the lock to determine if anything needs to be fixed. In many cases, a small adjustment to the springs of the handle can fix the issue.

It's easy to replace your uPVC handle, but you need to measure the existing handle to ensure that the new one is of the right size. You'll need to take measurements of the distance between the two fixing screws as well as the size of the lever and key-hole position. Then, you can utilize this uPVC handle size guide to locate the correct replacement for your home.

After you have made the measurements, remove the existing uPVC handle. It's usually a straightforward procedure that requires only a screwdriver. Once the screws are removed, you can then remove the handle and then install the new one.

It is important to secure the door with a wedge before you begin. This will stop it from closing during the course of your work. After removing the handle, you'll be able to inspect the components underneath the door that are causing the door to slide.

A handyman from Fantastic Services will be able to help if you don't want to tackle the task yourself or don't have the skills. They will employ specialist locksmith opening techniques to open the door without causing any damage and then replace the damaged handle and make sure that everything is working exactly as it should.

Gearbox damaged

A damaged gearbox could cause the handle made of upvc to become stiff and lose function. The lock may also be unable to be opened by keys. This could be dangerous and should be addressed as soon as possible. If you're unable to resolve the issue yourself it is crucial to contact a locksmith as they have the expertise and tools to do the job correctly.

The first step is removing the handle from the cover plate. You can do this with a screwdriver that has a flat-headed tip. After removing the handle, remove the middle screw which holds the cylinder. After removing the middle screw, you'll be able to loosen the two screws which are holding the barrel. Then, you can pull the barrel from the door. You'll have to open the door to do this, so make sure that you have someone to help.

After you have removed the cylinder you can replace it the cylinder with a new one. It is important to ensure that the new cylinder is the exact size as the old one. You may have an incorrectly aligned handle. This could cause various issues such as leaks and draughts.

Many upvc door handles have slots for adjustment. These slots can be used to tighten and loosen the handle. The slots are typically located on the inside of doors, close to the point where the handle joins the cylinder. Allen wrenches can be used to tighten the slots of adjustment. After you've made all the necessary adjustments, you can screw the handle into and put it back in position. Then, you can test the handle and ensure it works correctly.

If the door handle of upvc becomes loose or floppy when it is closed, it is typically a sign that the upvc gearbox has been damaged or the internal spring components are breaking down. This can cause the upvc multipoint lock to fail and leave your door open to intrusion. If this happens, it will be required to replace the upvc gearbox. This will cost between PS145 - PS280 inclusive of labour.